|
|
|
Pulse shaping filter program that finds the pole-zero locations of a transfer function, H(s), for a matched filter. H(s) equals a -desired- signal (Yout) divided by a given input signal (Yin). Both Yout and Yin are functions of frequency.
Group delay may also be calculated to compliment a given data set, thus, providing a flat group delay. Minimizing Intersymbol Interference in a read/write channel for disc drives by shaping and slimming an isolated readback pulse was the main objective for writing this program.
For more info, see Kost, R. and P. Brubaker; 'Arbitrary equalization with simple LC structures'; IEEE Transactions on Magnetics, Nov. 1981, pp 3346-3348 or visit http://www.digitalcalculus.com/page/785704.
This is a Fortran Calculus demo application.
|
|
|
traffic shaping
Automated barcode generator
bandwidth shaping
passwords generator
html generator
-------------------------
|
|
Pulse shaping filter program that finds the pole-zero locations of a transfer function, H(s), for a matched filter. H(s) equals a -desired- signal (Yout) divided by a given input signal (Yin). Both Yout and Yin are functions of frequency.
Group delay may also be calculated to compliment a given data set, thus, providing a flat group delay. Minimizing Intersymbol Interference in a read/write channel for disc drives by shaping and slimming an isolated readback pulse was the main objective for writing this program.
For more info, see Kost, R. and P. Brubaker; 'Arbitrary equalization with simple LC structures'; IEEE Transactions on Magnetics, Nov. 1981, pp 3346-3348 or visit http://www.digitalcalculus.com/demo/matched-filter.html .
Another improved productivity example do to using Calculus (level) programming.
Match n Freq: http://www.digitalCalculus.com/download/m-freq-install.exe
|
|
This program is a loudspeaker test software to help analyse defects and investigate functionality with the help of a synchronised LED stroboscope. This program generates synchronised signals that drive the speaker and an LED light stroboscope which enables you to see the speaker movements in adjustable slow motion speed. The only external hardware needed is a two channel amplifier and an LED flashlight. Traditionally these tests are done with dedicated hardware devices costing several thousand dollars or Euros. In this program the computer sound card supplies the two signals to the two channel amplifier. The speaker signal (sine wave on the left channel) is amplified and sent to the loudspeaker under test. The other signal is the light trigger pulse on the right channel. It is sent to the external trigger input of a stroboscope or it can also be amplified and sent directly to LEDs. A standard LED flashlight (British English: torch) is ideal as a stroboscope.
Strobe Sync Loudspeaker Test Software: http://www.esseraudio.com/StrobeSync_Setup_en.exe
|
|
|
|